Another update on the CNC.
The interfaceboards are etched, soldered and tested.
IO / Control Boards
Step- and directionsignals are generated by an ATmega32 which is controlled over RS232.
This is only for testing purpose. In the final version a PC will control the movement.
For more detail, Click here...
The interfaceboards are etched, soldered and tested.
IO / Control Boards
Step- and directionsignals are generated by an ATmega32 which is controlled over RS232.
This is only for testing purpose. In the final version a PC will control the movement.
For more detail, Click here...
No comments:
Post a Comment